Stainless Steel Grease Fat Traps and Separators

Code: OM/INOX -03/22

Grease separators are used for applications such as large restaurants and hotels where a grease separator should be considered to give additional volume.

See available options...
TAX not Included

Price: Specifications:

Capacity: 16,5 L / Inlet and Outlet Ø 5 cm Dimensions (WxDxH): 34,5x24x24 cm 140.00€ Capacity: 45 L / Fat Traps 15 Lt /Inlet and Outlet Ø 5 cm Dimensions (WxDxH): 47x35x29,5 cm 210.00€ Capacity: 100 L / Fat Traps 30 Lt /Inlet and Outlet Ø 5 cm Dimensions (WxDxH): 58x46x38 cm 350.00€ Capacity: 160 L / Fat Traps 40 Lt /Inlet and Outlet Ø 5 cm Dimensions (WxDxH): 72x52x53 cm 430.00€

Add to my list

Product was successfully added to cart

Description

Grease separators are used for applications such as large restaurants and hotels where a grease separator should be considered to give additional volume.
Operation and installation traps and separators allow fats and grease to naturally separate out from water, enabling their removal prior to the wastewater reaching the drainage system. The trap or separator should be installed close to the source of contamination before any foul waste can enter the drainage flow. The product should be specified to suit the expected liquid temperature.

All associations should be connected correctly to avoid water leakage.

1) The grease should be placed on a flat surface.

2) It is proposed to insert the grease on the bottom of the scullery and connect the output of the trough at the entrance of grease

3) There is oil output from both sides, so you can choose what is most convenient for your connection - placement.

4) There is an exit cleaning and an output (drain) in the grease, which should connect the drain.